All Motorized bicycles that you see on this page are custom built by
Venice Motor Bikes.

This page is long, please scroll down. ;)

Below is our 49cc 4-stroke Venice bike.

Many daily commuters prefer these 49cc 4-stroke bikes because of their proven long lasting reliability & use of regular pump gas… (they won’t leave you stranded on the side of the road).

We start by using a brand new 3G- Venice model bicycle because of it’s quality thick steel frame construction.

Next, we remove the standard thin spoke wheels & install heavy duty chrome steel wheels with thick 12 gauge spokes for safety & longevity.
(other bike sellers don’t bother with stronger wheels to save money).

Even though they’re brand new, all of our heavy duty rear wheels are disassembled, inspected & properly reassembled using lots of quality high-temp bearing grease to insure the rear brake won’t seize under the constant high speed braking that motorized bicycles put them through.

For extra safety, we always add front brakes to our bikes!! (look closely… other builders don’t bother with important things like brakes).

Next, we exclusively use the new 49cc 4-stroke 7G belt drive kits & we partially disassemble every engine to inspect for factory defects & to properly torque (& Loctite) all bolts.

While we have the engine apart, we install a ultra reliable 2-stroke NT carburator that’s been jetted for performace, & install a billet aluminum manifold. (the stock 4-stroke carbs are notorious for problems)

Finally, we professionally weld on the roller chain tensioner for the #415 engine chain so it will never get pulled into the spokes & cause a crash… (the other guys always take the easy way out & simply bolt them on). :(

Look close at the pics of our bikes & then look at the competitions bikes… you’ll see the difference in over-all quality!

This bike has a top speed of approximately 25mph… 35+mph is possible with additional ‘high performance’ parts & upgraded front brake purchase.

All of our bikes come with a full warranty from defective parts & labor… (buy from the other guys & you’re stuck with it). :(

Our bikes are guaranteed 100% street legal in California, & we’ll help you get the CA DMV license plate so you’ll never have problems with the police. :)

When you consider that this bike is 100% new with many hours of labor, tons of upgrades & a full warranty?…
$800 is a very good price for quality & peace of mind!

Motorized Bicycle, gas bike, bicycle engine

Motorized Bicycle, gas bike, bicycle engine

Motorized Bicycle, gas bike, bicycle engine

********************************************************************************

*********************************************************************************
Below is our 66cc (80cc) 2-stroke Venice bike.

We start by using a brand new 3G- Venice model bicycle because of it’s quality thick steel frame construction.

Next, we remove the standard thin spoke wheels & install heavy duty chrome steel wheels with thick 12 gauge spokes for safety & longevity.
(other bike sellers don’t bother with stronger wheels to save money).

Even though they’re brand new, all of our heavy duty rear wheels are disassembled, inspected & properly reassembled using lots of quality high-temp bearing grease to insure the rear brake won’t seize under the constant high speed braking that 35 mph motorized bicycles put them through.

For extra safety, we always add front brakes to our bikes!! (look closely… other builders don’t bother with important things like brakes).

Next, we partially disassemble every engine to inspect for factory defects & to properly torque (& Loctite) all bolts.

Finally, we professionally weld on the roller chain tensioner for the 415 engine chain so it will never get pulled into the spokes & cause a crash… (the other guys always take the easy way out & simply bolt them on). :(

Look close at the pics of our bikes & then look at the competitions bikes… you’ll see the difference in over all quality!

This bike has a top speed of approximately 35mph… 40+mph is possible with additional ‘high performance’ parts & upgraded front brake purchase.

All of our bikes come with a full warranty from defective parts & labor… (buy from the other guys here & you’re stuck with it). :(

Our bikes are guaranteed 100% street legal in California, & we’ll help you get the CA DMV license plate so you’ll never have problems with the police. :)

When you consider that this bike is 100% new with many hours of labor, tons of upgrades & a full warranty?…
$599 is a very good price for quality & peace of mind! ;)

Motorized Bicycle, gas bike, bicycle engine

*********************************************************************************

********************************************************************************

Below is a ‘patina’ 1947 Schwinn DX Rat Rod named ‘Fast & Loud’

This bike has lots of hand picked vintage crusty parts from our large vintage collection (for that ‘barn find’ look), yet it is mechanically modern & safe for everyday riding, & comes with a full warranty from our shop!

Here are some of it’s features…

It has a one of a kind hand made aluminum gas tank that fits the vintage Schwinn frame perfectly.

A genuine vintage Schwinn springer fork that’s been properly modified for a 185mm disc brake.

Modern ‘Hayes’ front hydraulic disc brake with extra large 185mm rotor for the ultimate in stopping power.

Brand new 66cc 2-stroke engine modified for a reed valve with VMB race porting for tons of extra power.

Genuine Fred Head billet high compression head.. (not one of those cheap copies)

Custom expansion chamber pipe.

16mm carb that’s been re-jetted for optimum performance by VMB.

Modern heavy duty steel wheels with fat 12-gauge spokes for safety… The wheels have been completely rebuilt & thoroughly greased for years of trouble free riding.

Genuine Brooks bicycle saddle.

Billet aftermarket aluminum rear 40-tooth sprocket & hub adapter.

It will go 40 mph with the sprocket that’s on it now… I can easily change the sprocket to make the bike go almost 50 mph if you’d like.

This bike is guaranteed 100% street legal & we’ll help you get the CA DMV license plate for it.

$1600 (or make us a fair offer)… :)

********************************************************************************

*********************************************************************************

Below is a freshly restored 1953 Schwinn Board Track Racer

It has a brand new powder coated frame & fork, & fresh chrome plating on many of the vintage parts.

We installed new polished 50mm wide Felt wheels with ThickSlick tires.

New stainless steel fuel tank

The current engine is a new stock VMB… (soon to change)

This bike isn’t finished yet…it still needs a hydraulic front disc brake, a full racing engine & pipe.

It will be $2200 when finished… (or $1800 as is)

please call if interested

*********************************************************************************